Do You Really Have To Register Bmw Battery

What Do I Need to Register a BMW BBattery

You volition need a BMW Scanner to annals a BMW and follow the process below to program the new bbattery A few scanners that can register a BMW bbatterystart in the mid-$100, such every bit Autophix for BMW, an affordable and pop choice.

The difference between Registering a New Battery and Coding a New Battery can be confusing:

• Registering - This is a simple process that is always required. It only tells the vehicle the battery has been replaced with a new battery that has identical (or very close) specifications to the bombardment that was simply removed. Nigh full system BMW scanners tin complete this procedure. Skipping this stride can shorten the life of the new bombardment.
• Coding - This is a required stride if yous install a new battery that has specifications that are very different than the battery you are replacing. If y'all install a new battery with significantly dissimilar Cold Cranking Amps (CCA) or Ah or battery type (Lead or AGM), then you need to complete coding. Very few scanners can complete this procedure. We strongly recommend that you await at the old battery and endeavor to observe a replacement battery with similar specs. CCA, Ah should not vary by more than 5% if you want to skip coding. The 5% value is based on our testing and feel.  Also practise non change bbatterytype. If the old bbatteryis AGM, find the same type of bbattery

Generic OBD-Ii scanners tin non register or program a new BMW battery. This is one of the main reasons why stores such equally AutoZone will not replace the battery on a BMW.

How to Register a BMW Battery

The following process will let you lot to program and reset the BMW computer after changing the bombardment.  These instructions will assist you register a BMW batbattery 2002 or newer models, including ane, three, 5, half-dozen, X1, X3, X5 series, etc.

1. Replace the bombardment in your BMW. If you need assist with this step, run into our guide on how to replace a BMW battery.  Find a new bbatterythat matches the old bbattery The ratings (CCA, CA, Ah) should be identical or every bit close equally possible to the original.

   

2. Locate the onboard diagnostic port under the dashboard about your brake pedal. The OBD-2 port on BMW cars has a small door that y'all will need to open up. You may also find a encompass on the port that you need to pull out. Plug your BMW browse tool of option into this port. Retrieve, generic OBD2 scanners cannot perform the necessary BMW batbatterygistration.

   

3. Turn Ignition On. Turn the key to option Two. If you lot have a Push Showtime button, press it twice. Don't press the brake pedal when pressing the first button. All the dashboard lights should turn on. The engine shouldn't be running. You lot won't perform the BMW bbatteryregistration procedure if the engine is running.

   

4. Next, select your BMW model, and then select the Control Unit.

5. Select Power Supply module.

6. Select Register a new BMW battery.

   

7. Press, OK, and the new battery is registered. The following section shows you how to use specific scanners to register the battery.

How to Annals BMW Battery with Foxwell

Foxwell NT510 for BMW is a scanner capable of registering a new BMW bbattery This great scan tool is, in fact, capable of reading and immigration error codes from multiple BMW systems.

For example, y'all tin use this scanner to read and clear codes from modules such every bit the engine, airbag(southward), transmission, ABS, and more.

Procedure

1. Plug your BMW scan tool into the OBD2 port under the dashboard. ...
2. Turn ignition on, the cardinal to position II. ...
3. Select BMW. ...
4. Scroll downwardly to the Body card 4.
5. Scroll down to Power Supply (Bombardment) and printing Enter.
6. Select choice 2 for Battery registration.

Notes

• It tin can only register a new battery with the same specs as the original.
• Make certain to update your Foxwell scanner to the latest software via the Foxwell website.

How to register BMW bombardment with INPA

BMW INPA M+Tin can setup requires a laptop. INAP is more complex to set up and difficult for many owners. Not recommended if you lot do not take experience with the INPA software.

1. Connect OBD-II Cable to your OBD-Two port. Plough on your laptop, then run the INPA software.
2. Select Torso>Ability Module
3. Printing F6 to Activate
4. Press F2 to select Control
5. Printing F7 to choose Register bbatteryreplacement
6. If registration is successful, you volition get the message, 'R egister Battery Replacement Activated Properly.'

These steps will enable users to successfully annals a new battery with the same desired specs. These steps volition non code a new bombardment with different specs.

What will happen if I don't register a BMW battery?

Don't panic! If y'all don't register a BMW bombardment, the car will Not grab burn down. The engine volition start, and the vehicle will drive even if you don't register the battery.

If you don't register the BMW battery, the about likely outcome is that the bombardment volition not terminal as long. And then instead of the battery lasting five years, it may but last two or three years due to over or undercharging.

Nosotros have seen very few cases were not registering the battery leads to electrical issues, but that is ordinarily because the replacement bombardment'southward specs (CCA, CA, Ah) are significantly lower than the OEM battery.

We practise not recommend skipping bombardment registration on a BMW just get some guy on Youtube replaced the BMW bombardment without programming information technology.

What is the Best BMW Bombardment Registration Scan Tool?

To register a BMW battery, y'all will need an OBD-II scan tool. Hither are some of the most pop scan tools used to plan a BMW battery.

1. Foxwell for BMW NT510 - One of the virtually pop BMW scanners. The tool can register a new BMW babatteryith similar specs compared to the previous batbatterynstalling a new batbatteryth significantly unlike specs requires coding, which is not currently available on Foxwell NT510.
2. AutoPhix 7910  BMW Browse Tool - is i of the cheapest browse tools to annals a BMW babattery
3. Autel MaxiSys - Professional Level Diagnostic Scanner. It can be used to program and code whatsoever babatteryincluding AGM and lead-acrid, even if the replacement batbattery significantly different than the original.
4. BMW INPA Software (INPA K+Tin) -  Require a laptop and familiarity with INAP software.
5. BlueDriver OBD2 Scanner - An affordable scanner that should register a BMW babattery

Other scan tools tin annals a BMW battery, but these are the most pop in the DIY customs.

Frequently Asked Questions

Do I Need to Annals a BMW Bombardment?

A BMW battery needs to be registered so that the engine control module ( DME - Digital Motor Electronics) knows how much current the battery needs to charge correctly.

Skipping the bombardment registration procedure can cause the new battery to neglect prematurely due to over or undercharging.

BMW battery registration was introduced with a few 2002 model years, and by 2005 nearly BMW models required bombardment registration. If your BMW is older than 2002, yous don't demand to perform battery registration.

Do I demand to register a BMW bombardment every time I change the battery?

Every time you replace the battery on a 2002 and newer BMW, you need to register it, which is a straightforward procedure but requires a BMW scanner.

If your new battery has dissimilar specs than the old battery, you demand to perform a few extra steps, known as coding.

What is the divergence between BMW Battery Registration and Coding?

Our members often enquire what the difference is between BMW bbatteryregistration vs. coding. The registration process clears the old bbatterys charging history and tells your BMW that a new bbatteryhas the same specs every bit the old bbatteryinstalled. The Engine Control Unit (DME) tin charge the babatteryroperly.

• Battery Registration
  • Registration must be performed every time you lot change the battery on a 2002 and newer BMW. It lets the car know the battery installed is make new.
  • No coding will exist required if the new battery has the same specs or is very shut to the former bbattery(CCA, CA, Ah, bbatterytype).
• Bombardment Coding
  • You lot will need to carry out coding if you alter the battery capacity or type in add-on to the registration procedure. Coding is required if the new bbatteryhas dissimilar specifications than the old babatterynstalled in the automobile.
  • For case, if you install a battery with a higher or lower cranking Ampere rating or switch between Lead Acid and an AGM battery, yous need to code (program) the DME. Otherwise, the DME may overcharge or undercharge the new bombardment and, therefore, shorten the battery's life.

Can I use an OBD-2 scanner to register a BMW battery?

• To complete the BMW battery registration process yourself, you will demand an OBD2 scanner to perform the BMW battery registration. Non all OBD-2 scanners can register a BMW bombardment.

What changes in the ECU when y'all annals a BMW bombardment?

• Battery capacity is fix to 80%

• The current Odometer reading is stored.

• Delete stored battery statistics such as:

  • Current

  • Voltage

  • Battery Charge Level.

• Stored temperature statistics are deleted.

Can I supplant the battery myself and bulldoze it to the mechanic for the registration?

• Yes. No damage will happen if you have to drive your BMW for a few minutes. It is the overcharging or undercharging that lasts for months that can shorten the life of the battery or cause problems.

What is BMW Battery Coding?

• Ideally, you should avoid installing a battery with different specs, simply that doesn't always happen. If you install a battery with a college or lower chapters, BMW has dissimilar charging maps (profiles) for each battery, such as  80Ah, 90Ah, or 110Ah batteries.
• You volition need to perform coding to let the DME module know that you have changed the battery capacity.  If you changed the batbatterype, you would need to complete batbatteryding.
• BMW charges lead-acid-type batteries differently than AGM batteries.  Yous demand to perform coding if you: Change batbatterype from Lead Acrid to AGM or vice-versa.  Modify the battebatterycity.

Why do I have to perform BMW bbatteryregistration?

• Yes. Don't skip bombardment registration. If yous don't take a scanner, discover an independent repair shop to complete the job for you. Some shops may only charge 0.five hr of labor.

Which BMW models demand battery registration?

• Most 2002 and newer models.
• E61, E63, E64, E65, E66, E67,
• E70, E71, E72, E81, E82, E84,  E87,
•  E88, E89, E90, E91, E92,  E93, F01, F10.

Should I reset error codes?

• A depression voltage mistake lawmaking might have been triggered and stored in various systems if you had a failing BMW battery.
• Perform a scan of all systems and clear whatsoever codes that may accept been stored. This procedure should also remove any Safe Modes, including Energy Saving and Transport Modes.

How do I know if my BMW requires registration?

• Hither is a listing of BMW models that crave Battery Registration:
  • 2006 and upwards iii-series E90 E91 E92 E93
  • 2004 and upward 5-series E60 E61
  • 2003 and up 6-serial E63 E54
  • 2002 and up 7-series E65 E66
  • 2007 and up X5 serial
  • 2008 and up  E70 cchassis
  • X6 series E71 chassis
• Bank check with your BMW dealer to confirm.

Can AutoZone register a BMW bombardment?

AutoZone does not install or register the battery on 2002 and newer BMWs. We have called various AutoZone's, and they volition not install the battery in models that crave bombardment registration. If your BMW is older than 2002, AutoZone may be able to install the battery as those models exercise not require battery registration.

References

1. BMW Bombardment Replacement and Registration Bimmer-tech.cyberspace
2. BMW Battery Replacement – Why register a new BMW battery? - AutoScopeCarCare.com
3. BMW Battery Registration - BimmerScan.com
4. DIY: Register and Code a New Battery (comprehensive guide) - 1Addicts.com
5. Battery Registration with Carly (BMW Simply) -mycarly.com

Do You Really Have To Register Bmw Battery,

Source: https://www.youcanic.com/wiki/bmw-battery-registration-coding

Posted by: fontanaalmyconver.blogspot.com

Share this post